Be the first to review this product
Expected January 31, 2025
The RE3-HHT is a lightweight, yet robust UHF handheld transmitter body. It is ideally-suited for professional performance and presentation applications. Due to its commonly-used 1.25" diameter, 28 UN-2A thread pitch microphone head coupling, it accepts mic heads using this common coupling convention. Although primarily intended to accept the ND and RE Series heads developed for RE3 listed in the accessories section of this data sheet, the RE3-HHT will adapt other microphone heads using the 1.25" diameter, 28 UN-2A thread pitch coupling scheme.
The RE520-RC3 is a premium-grade, high-performance, condenser supercardioid thread-on vocal microphone head for wireless handheld transmitters. Designed to reveal the exceptional detail and vivid clarity synonymous with condenser elements, it elegantly delivers the lyrical finesse required for expressive vocal performances, while controlling off-axis sound from near-by sources. This microphone head electrically and mechanically adapts to Electro-Voice (and many other brands) wireless handheld transmitters that use the common 3-contact rings, 1.25" diameter by 28-thread pitch coupling convention. The floating captured ID collar will spin freely until screwing the head on tightly. It will remain locked in place when fully tightened. This allows the desired orientation of the branding to the transmitter.
Electro-Voice UHF Wireless Transmitter with RE520 Microphone Features:
- Robust metal body.
- Sync function for easy frequency setup.
- Selectable low and high output power (band specific.)
- Up to 36 MHz tuning bandwidth (band specific.)
- Common threaded coupling allows microphone head interchangeable.
- Thread-on microphone head for Electro-Voice and other brand's wireless handheld transmitters.
- Premium condenser element delivers a highly detailed, rich, and full bodied sound.
- Supercardioid polar pattern provides excellent acoustic isolation and feedback control.
- Multi-stage pop filter minimizes breath blasts and plosives.
- Selectable high-pass filter reduces undesirable low frequency content when engaged.
Electro-Voice RE3-HHT520-5L Specifications:
5L Band Details
Bandwidth limits (MHz): 488 – 524
Tuning bandwidth: 36 MHz
Selectable frequencies: 1440
Transmit output power (mW): 10 and 50
Coverage: Global
RE3-HHT Handheld Transmitter
Frequency Oscillation Mode: Phase-locked loop (PLL)
Sync Frequency: Ultrasonic
Display By: LCD + LED
Function Controls: Power, mute, group, channel, frequency, sensitivity adjustment, RF power, auto off, key lock.
RF Stability: <±10kHz@Fc
Modulation Frequency Shift: Wideband FM \ ±48kHz deviation
Harmonic Radiation: <-50dBc
Battery: 2 x AA alkaline battery or NiMH rechargeable battery
Charging Contacts: Yes
Microphone Coupling: 1.25" diameter, 28 UN-2A thread pitch
Microphone Electrical Contact: 3-ring/3-pin
Finish: Black polyurethane paint
Dimensions (without head): Height: 7.52 inch (191mm)
Width at threaded end: 1.46 inch (37mm)
Width at control cover: 0.856 inch (22mm)
Net Weight: (without head): 12.2oz [346 grams]
Gross Weight (without head): 16.9oz [480 grams]
RE520-RC3 microphone head
Element type: Self-biased condenser
Frequency response: 50 Hz-20 kHz
Polar pattern: Cardioid
Sensitivity, open circuitvoltage @ 1 kHz: 5.6 mV/Pascal (-45 dBV/Pa)
Clipping (max SPL): 139 dB SPL (1% THD)
Self noise: 22 dB SPL "A" weighed (0 dB=20 μPa)
Dynamic range: 117 dB
Signal-to-Noise ratio: 72 dB
Output impedance: 1000 ohms
Power requirements: 4-8 VDC phantom power
Polarity: Positive pressure on diaphragmproduces positive voltage at centercontact relative to ground contact
Electrical contact: 3-Ring/3-Pin
Threaded coupling: 1.25" diameter 28 UN-2A thread pitch
Finish: Black polyurethane paint
Materials: Aluminum, steel, steel wire grillescreen
Dimensions, length diameter: 3.36 in. (85.3 mm) 1.95 in. (49.6 mm)
Net weight: 4.6 oz (130 g)
Shipping weight: 6.7 oz (190 g)
(1) RE3-HHT Handheld Transmitter
(1) RE420-RC3 microphone head
(1) Microphone stand adapter
(2) AA batteries
(1) Engineering Data Sheet
(1) Warranty card
(1) Declaration of conformity
Login
Register
Forgot Your Password