Be the first to review this product
JBL Professional Control 28-1L High Output 8-Ohm Indoor/Outdoor Background/Foreground Loudspeaker
SKU
CONTROL-28-1L
$296.00
Item Backordered
Expected January 31, 2025
Only at IDJNOW
The Control 28-1L is a two-way 8" speaker with rich sonic character, wide coverage, consistent coverage, versatile mounting, and a contemporary high-design look that fits into a wide range of decors, This makes Control 28-1L an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required.
JBL Professional Control 28-1L Loudspeaker Features:
- 8" woofer with woven fiberglass cone.
- 1" PEI diaphragm tweeter with fluid cooling.
- Contemporary, high-design appearance.
- Built-in InvisiBall mounting hardware, plus available U-bracket.
- Weather resistant enclosure and transducers.
- Wide 100° x 100° coverage.
- 120 Watt power handling (240 Watt program.)
- High fidelity sound character with broad frequency response of 45 Hz - 20 kHz.
JBL Professional Control 28-1L Product Specifications:
| System | |
|---|---|
| Frequency Range (-10 dB)1 | 45 Hz - 20 kHz |
| Frequency Response (±3 dB) | 62 Hz - 16 kHz |
| Power Rating2 | 240W Continuous Program (2 hrs) 120W (480W peak), Continuous Pink Noise (2 hrs) 90W (360W peak) Continuous Pink Noise (100 hrs) |
| Maximum Input Voltage | 27.5 V RMS (2 hrs), 55.0 V peak |
| Maximum SPL3 | 112 dB ave. Continuous Pink Noise (118 dB peak) |
| Sensitivity4 | 91 dB, 1W/1m (ave. 100 Hz - 10 kHz) |
| Coverage Angle5 | 100° x 100° |
| Directivity Factor (Q) | 7.3 (averaged 1 kHz - 16 kHz) |
| Directivity Index (DI) | 8.3dB (averaged 1 kHz - 16 kHz) |
| Nominal Impedance | 8 ohms |
| Crossover Type | 2nd order low-pass, 1st order high-pass, plus conjugate shaping |
| Circuitry | |
| Recommended Protective High-Pass6 | 45 Hz high-pass (24 dB/oct) |
| Transducers | |
| Low Frequency | 200 mm (8 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure |
| High Frequency | 25 mm (1 in) PEI diaphragm, low-viscosity ferromagnetic fluid, and lightweight Kapton voice coil former |
| Physical | |
| Enclosure Material | High Impact Polystyrene (HIPS) with 10% glass fill, painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance |
| Grille | Highly zinc-plated, finished in durable TGIC polyester powder coating. MTC-28WMG-1 (&-WH) available with WeatherMax multi-layer foam and tight-weave mesh vapor barrier backing. |
| Installation | InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-28WMG-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel. |
| Environmental | IP-44 per IEC529 (IP-55 when installed with the optional MTC-28WMG-1 WeatherMax grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC28WMG-1 WeatherMax grille for breaking up driving rain and for especially difficult environments. |
| Termination | Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection. |
| Agency Rating | ROHS-compliant |
| Colors | Black (RAL9004) or white (-WH, RAL9016) |
| Dimensions (H x W x D)7 | 386 x 282 x 219 mm (15.2 x 11.1 x 8.6 in); 277mm (10.9 in) deep total when mounted on InvisiBall wall-mount bracket |
| Net Weight (each) | 6.2 kg (13.5 lbs) |
| hipping Weight (pair) | 13.4 kg (29.5 lbs) |
| Included Accessories | InvisiBall wall-mounting system, 6 mm x 180 mm hex key |
| Optional Accessories | MTC-28UB-1 - Yolk-type U-bracket (&-WH) MTC-28WMG-1 - WeatherMax grille with backing (&-WH) MTC-28/25CM - Ceiling-Mount InvisiBall adapter (&-WH) |
1 - In half-space (on-wall, 2pi)
2- Continuous Pink Noise rating is IEC-shaped pink noise with a 6 dB crest factor.
Continuous Program Power is defined as 3 dB above the Continuous Pink Noise.
Rating and is conservative expression of the system’s ability to handle normal speech and music program material.
3 - Calculated from sensitivity and power handling, exclusive of power compression
4 - Half-space (on-wall) averaged 100 Hz - 10 kHz, 2.83V
5 - Coverage angle (-6 dB) average between 600 Hz and 12 kHz
6- For protection against driving below resonant frequency and to keep transformer out of saturation
7 - In vertical orientation
The Control 28-IL Box Includes:
(1) JBL PRO Control 28-IL High Output Indoor/Outdoor Background/Foreground Loudspeaker(1) InvisiBall wall-mounting system
(1) 6 mm x 180 mm hex key
Login
Register
Forgot Your Password