Be the first to review this product
Numark Scratch 2-channel 24-bit Serato DJ Pro Mixer with Large Format 10" DJ Mixer Case Package
SKU
SCRATCHXUSNCASE
Special Price $571.40 Regular Price $706.29
Item Backordered
Expected January 31, 2025
Only at IDJNOW
Numark Scratch DJ Mixer Features:
- Serato DJ Pro with DVS License Included.
- Ready to connect to Serato NoiseMap Control Vinyl or CDs (available separately).
- InnoFADER scratch crossfader with reverse and slope control.
- (6) direct access effect selectors with dual paddle launch triggers and Dry/Wet FX Control.
- (8) performance pads to access hot cues, rolls and samples.
- Filter knobs to create audio sweeps.
- Dedicated instant looping knobs.
- Phono/Line inputs.
- Combo mic input (XLR/¼-inch) w/ level and tone control.
- 108dB S/N output with 24-bit digital sound quality.
- Balanced high output XLR connection.
- Separate booth/zone output.
- Dual headphone output cueing system (¼-inch/ 1⁄8-inch).
- Scroll and load tracks on the mixer easily by holding shift + loop encoder knob.
- Prime Loop Sound Pack included ($200 value).
- SoundSwitch lighting control software 2-month subscription included.
The Numark Scratch offers a versatile array of features with powerful simplicity unheard of in this category of affordable mixer: Six direct access software FX buttons deliver quick access to a comprehensive array of effects with both timing and intensity controls. These effects are triggered by a pair of intuitive performance-based toggle paddles, usually found only in mixers at premium price points.
Instant Loop Encoder
Looping simplified! Keep the beat going by pressing the encoder down, and it will loop to the default parameters set in your software. Turn the knob to the right to extend the beat and to the left to shorten the loop – it’s that easy!
Superior Sound Quality, Whatever Your Setup
Play your best with the best! The professional quality of the Numark Scratch is unrivaled - with an impressive 108dB S/N ratio, performancedriven connectivity, and 24-bit digital sound quality, Scratch guarantees you always sound your best. Plus, there is a Low/High-pass filter that is not software-dependent, so it works as conveniently and effectively with analog turntables as it does with software-based FX and controls—amazing versatility!
InnoFADER Crossfader
Everything the turntablist demands is here including a butter-smooth InnoFADER. This high-quality crossfader is engineered especially for scratch DJs, offering bullet-proof reliability that’s perfect for the heaviest-handed scratch DJ and the hottest non-stop action. There’s even reverse and slope controls for must-have adaptability in any performance setting.
DVS Ready
Scratch includes the full version of Serato DJ Pro and the complete DVS Expansion Pack (a $99 value). The DVS Expansion Pack gives you immediate access to connect turntables or CD/media players and control Serato DJ Pro using Noisemap Control tone vinyl or CDs. With the included Serato DJ Pro license you can also connect any dedicated controller, like the Numark NDX500 and have a full setup at your fingertips.
Performance Pads
Four performance pads deliver hot cue triggering, rolls for creative build-ups and quick beat stabs, and sampler control so DJs can spice up their mix — all unheard of at this price point. Separate direct access software looping controls are found on each channel, empowering DJs to unleash their creativity.
Connectivity
Scratch features all the necessities for any setup scenario. Combining XLR main outputs, an unbalanced booth output, unbalanced line/ phono channel inputs, a microphone/auxiliary input for XLR or ¼-inch TS controlled and a dedicated mic level control, Scratch is primed for whatever your next routine demands!Numark Scratch DJ MIxer Specifications
Power supply: Internal 100v – 240v
Dimensions: 12.05" (L) x 9.61" (W) x 3.32" (H)Master Outputs (balanced XLR) Frequency Response 20Hz – 20kHz (+0.2dB) Signal-to-Noise Ratio 108dB (A-weighted, max output) THD+N 0.007% (1 kHz, -1dBFS) Maximum Output Level +20dBu Output Impedance 300Ω Master and Booth Outputs (RCA) Frequency Response 20Hz – 20kHz (+0.2dB) Signal-to-Noise Ratio 107dB (A-weighted, max output) THD+N 0.005% (1kHz, -1dBFS) Maximum Output Level +6dBV (2Vrms) Output Impedance 300Ω Headphone Outputs (¼” and 1⁄8” TRS) Frequency Response 20Hz – 20kHz (+0.2dB) Signal-to-Noise Ratio 108dB (A-weighted, max output, unloaded) THD+N 0.005% (1kHz, 10mW per channel into 32) Maximum Output Level +14dBu (unloaded) Power Output 115mW RMS (per channel into 32Ω) Output Impedance 32Ω Line Inputs (RCA) Frequency Response 20Hz – 20kHz (+0.3dB) Signal-to-Noise Ratio 102dB (A-weighted, max input level) THD+N 0.008% (1kHz, +6.8dBV, -1dBFS) Max Input Level +7.8dBV (2.45Vrms) Input Impedance 47kΩ Phono Inputs (RCA) Frequency Response RIAA Curve Signal-to-Noise Ratio 99dB (A-weighted, max input level) THD+N 0.01% (1kHz, -3dB input) Other Specifications USB USB 2.0 High-Speed ADC / DAC 24-bit, 48kHz DSP 32-bit fixed point Drivers PC: ASIO and Windows Audio
Mac: UAC2 Class Compliant (no add’l driver needed)Power Input Typical: 120VAC / 240VAC / 50Hz / 60Hz Auto-Switching
(1) Numark Scratch 2-channel 24-bit Mixer for Serato DJ Pro
(1) ProX Large Format 10" DJ Mixer Case [XS-M10]
(2) 20FT Sure-Fit XLR Connecting Cables
(5) 8" Reusable Hook and Loop Cable Ties
The Scratch Retail Box Includes:
(1) Numark Scratch DJ Mixer
(1) IEC Power Cord
(1) User Guide
(1) Serato DJ Pro with DVS License (Download)
(1) Prime Loops Sound Pack Kit (Download)
(1) USB Cable
(1) Safety and Warranty Manual
Login
Register
Forgot Your Password